Leave a message for inquiry
Leave your phone number, and we'll get in touch with you as soon as possible.
Signal generator
SG-01 Simple Signal Modulator 
Features:
- Adjust the duty cycle from 1 to 99%, the modulation frequency from 0.1 Hz to 100 kHz and the output voltage from 0 to 5 V.
- Set different frequencies and observe the corresponding period and pulse width.
SG-02 External Signal Modulator
The external signal generator is designed and manufactured to produce a pulse signal according to the customer's requirements. It can be adjusted for high and low electrical levels, as well as for cycle length.
Features:
- Can generate ≤5 pulse signal each time, the high and low electrical level can be changed.
- Time of 1, 3, 5, 7, 9 high electrical level: 0-10000/ms variable.
- Time of 2, 4, 6, 8, 10 low electrical level: 0-10000/ms variable.
- Cycles: 1-1000 to infinite.
- ON and OFF button: Start and stop generating pulse.
- Reset function.
SG-03 Multifunctional Pulse Trigger
 |
Features:
- Features 3 channels that can be used simultaneously;
- Combines both internal and external triggering functions;
- In internal trigger mode, channels 1 and 2 have a frequency range of 1 Hz to 25 MHz.
- 3-channel adjustable duty cycle, with pulse count setting;
- Features synchronous signal acquisition;
- Customization available.
Signal Generator-SIG100
SIG100 is a multifunctional and high-precision portable signal source, which can provide frequency, waveform and output electrical signal. Especially used in optogenetics, by changing the parameters such as laser amplitude, time, precise light control can be achieved for specific cells of the organism to control the behavior of the cells. The pulse train signal can be designed and manufactured according to customer requirements to realize high and low level conversion or cyclic conversion.
Features:
1. LCD screen
2. Three user interfaces: M1, M2, M3
3. External rechargeable battery
4. Adjustable angle of bracket
5. Equipped with PC operation software, can be controlled by PC.
6. Can provide synchronous trigger signal for multiple light sources (output resistance 50Ω)
7. Customization is acceptable
Interface-M1
Frequency | 0-100KHz |
Duty Cycle | 1%–99% |
Amplitude | 0-5V |
Interface-M2
Amplitude | 0-5V |
Interface-M3 (Pulse Train)
Pulse signals | ≤3 |
High level T1, T3, T5 | 0-30s optional (stepping 1ms) |
Low level T2, T4, T6 | 0-30s optional (stepping 1ms) |
Cycle period (n) | 1-1000 infinite cycle |
Example of Testing Results
 |  |
Interface-M1
| Interface-M3 T1=50ms, T2=100ms, T3=25ms |
Changchun New Industries Optoelectronics Technology Co., Ltd.
Address: No. 888 Jinhu Road, High-Tech Zone, Changchun, 130103, P.R.China
International Tel:+86-431-85603799
Email: sales@cnilaser.com
Send a Message
Leave your phone number, and we'll get in touch with you as soon as possible.